Interrogation of FBG-based strain sensors by means of laser radio-frequency modulation techniques
Year: 2006
Authors: Gagliardi G., Salza M., Ferraro P., De Natale P.
Autors Affiliation: CNR – Istituto Nazionale di Ottica Applicata, Via Campi Flegrei 34, 80078 Pozzuoli (NA), Italy;
European Laboratory for Non-Linear Spectroscopy (LENS), Via Campi Flegrei 34, 80078 Pozzuoli (NA), Italy
Abstract: We report on novel, highly-sensitive methods for interrogation of fibre Bragg gratings (FBGs) as well as high-finesse fibre resonators. Basically, the strain detection technique relies on radio-frequency modulation of a telecom distributed-feedback diode laser with phase-sensitive detection of the sensor-reflected signals. In a first set-up, the optical power from a fibre grating is demodulated at multiples of the sideband frequency and a dispersive signal, which monitors thermal and mechanical stress on the FBG, is generated. A fast Fourier transform analysis of this signal revealed the possibility of detecting dynamic strains up to 20 kHz, this limit being set only by the bandwidth of the test device. Minimum detectable strain levels below 200 ne Hz(-1/2), in the quasi-static domain (0.5-2 Hz), and between 1 and 4 n epsilon Hz(-1/2) in the 0.4-1 kHz range, were achieved. A different approach is based on an in-fibre Fabry-Perot cavity, made of an FBG pair with very high peak reflectivity (>99%). In this scheme, the diode laser was actively frequency-locked to the FBG cavity, using the Pound-Drever-Hall technique. The resulting error signal was used as a monitor of the strain suffered by the intra-cavity fibre. We demonstrated that a sensitivity gain of at least one order of magnitude could be obtained by this system in a very compact design. Analysis and quantification of the main limiting factors were also carried out in both cases.
Journal/Review: JOURNAL OF OPTICS A-PURE AND APPLIED OPTICS
Volume: 8 (7) Pages from: S507 to: S513
KeyWords: Bandwidth; Laser applications; Modulation; Semiconductor lasers; Signal processing; Stress analysis; Thermal stress, Diode laser; Fabry-Perot cavity; Fibre Bragg gratings; Strain measurements, SensorsDOI: 10.1088/1464-4258/8/7/S31Citations: 18data from “WEB OF SCIENCE” (of Thomson Reuters) are update at: 2024-11-17References taken from IsiWeb of Knowledge: (subscribers only)Connecting to view paper tab on IsiWeb: Click hereConnecting to view citations from IsiWeb: Click here