Microstructure and laser performance of fine-grained Yb:CaF2 transparent ceramics prepared by two-step sintering

Year: 2023

Authors: Guo LH., Shi Y., Tian F., Chen HH., Toci G., Pirri A., Patrizi B., Vannini M., Li J.

Autors Affiliation: Chinese Acad Sci, Shanghai Inst Ceram, Transparent Ceram Res Ctr, Shanghai 201899, Peoples R China; Univ Chinese Acad Sci, Ctr Mat Sci & Optoelect Engn, Beijing 100049, Peoples R China; Chinese Acad Sci, Shanghai Inst Ceram, State Key Lab High Performance Ceram & Superfine M, Shanghai 200050, Peoples R China; CNR, Ist Nazl Ott, Consiglio Nazl Ric, INO, Via Madonna Piano 10C, I-50019 Sesto Fiorentino, FI, Italy; CNR, Ist Fis Applicata Carrara, Consiglio Nazl Ric, IFAC, Via Madonna Piano 10C, I-50019 Sesto Fiorentino, FI, Italy.

Abstract: The 5 at.% Yb:CaF2 transparent ceramics were successfully fabricated by hot pressing (HP) combined with hot isostatic pressing (HIP) for the first time. The raw nano-powders were synthesized by the co-precipitation method and the influence of HP temperature and HIP post-treatment on the optical quality and microstructures of Yb: CaF2 transparent ceramics were investigated. After HIP post-treatment (600 degrees C x 3 h, 100 MPa Ar), the micro pores in the hot pressed ceramics were further eliminated and all ceramics revealed high optical quality. The ceramic sample hot pressed at 575 degrees C for 2 h and HIP post-treated at 600 degrees C for 3 h shows the best optical quality with the in-line transmittance of 90.5% at 1200 nm (3.9 mm thickness), and the average grain size of ceramics is only 470 nm. And the absorption and emission cross sections of ceramics were calculated. Finally, the laser performance of 5 at.%Yb:CaF2 transparent ceramics was tested. The maximum output power of ceramics was 1.12 W, which is higher than other Yb:CaF2 ceramics fabricated by pressure-assisted sintering method reported in literature, with a corresponding, slope efficiency of 11.6%.

Journal/Review: OPTICAL MATERIALS

Volume: 140      Pages from: 113841-1  to: 113841-8

More Information: This work was supported by the National Key R & D Program of China (Grant No. 2021YFE0104800) , the International Partnership Program of Chinese Academy of Sciences (Grant No. 121631KYSB20200039) , and the INTERNATIONAL COOPERATION Project of Shanghai Science and Technology Commission (Grant No. 2052075 0200) . The activity was also partially supported by the National Center for Research and Development (Contract No. WPC2/1/SCAPOL/2021) .
KeyWords: Yb; CaF2; Transparent ceramics; Microstructure; Laser performance; Two-step sintering
DOI: 10.1016/j.optmat.2023.113841

Citations: 2
data from “WEB OF SCIENCE” (of Thomson Reuters) are update at: 2024-10-20
References taken from IsiWeb of Knowledge: (subscribers only)
Connecting to view paper tab on IsiWeb: Click here
Connecting to view citations from IsiWeb: Click here