Fabrication of single-nanowire sensing devices by electron beam lithography

Anno: 2015

Autori: Donarelli M., Milan R., Ferroni M., Faglia G., Comini E., Sberveglieri G., Ponzoni A., Baratto C.

Affiliazione autori: Sensor Lab., Dept. of Information Engineering, Univ. of Brescia and CNR-INO Brescia, Via Branze 38, Brescia, 25123, Italy; CNR-INO Brescia, Via Branze 38, Brescia, 25123, Italy

Abstract: In this paper, we report on the feasibility of single nanowire devices fabrication by electron beam lithography. SnO2 and ZnO nanowires bundles have been synthesized by vapor-liquid-solid technique, dispersed in isopropanol and then deposited on SiO2/Si substrates. Once the nanowire has been selected, the electrodes have been patterned on the photoresist by the electron beam. Finally, after Pt sputtering and subsequent lift-off, we have obtained samples with SnO2 or ZnO nanowire and Pt electrodes deposited on it. The electrical characteristics of the devices have been preliminary investigated by DC measurements and impedance spectroscopy. The SnO2 single nanowire devices show a good sensitivity to relative humidity. The ZnO single nanowire device shows three orders of magnitude increase of the current when exposed to UV light and a fast recovery of the baseline in air when the UV light is switched off.

Titolo Convegno:
Luogo:

Maggiori informazioni: Sponsors: Italian Association for Sensors and Microsystems (AISEM)
Parole chiavi: Electrodes; Electron beam lithography; Electron beams; Gas sensing electrodes; Photoresists; Platinum; Zinc oxide, EBL; Electrical characteristic; Gas sensing; Impedance spectroscopy; Single nanowires; Three orders of magnitude; Vapor-liquid-solid techniques; ZnO, Nanowires